Invacare Bora Series, Руководство пользователя

Страница: 44 / 128

Invacare® Bora/Spectra XTR Series
Fig. 5-21
1. Loosen screws A .
2. Position joystick on holder.
3. Tighten screws.
Adjusting Depth and Height
Refer to 5.6.3 Adjusting Swing-Away Mechanism, page 44 .
5.6.2 Adjusting Egg Switch
Adjusting Switch Orientation
The egg switch can be turned through 360 degrees.
• 7/16 inch wrench
Fig. 5-22
1. Loosen nut
A
.
2. Adjust egg switch orientation.
3. Tighten nut.
Adjusting Depth and Height
Refer to 5.6.3 Adjusting Swing-Away Mechanism, page 44 .
5.6.3 Adjusting Swing-Away Mechanism
WARNING!
Risk of Injury or Death
Small parts can lead to choking hazard that may
result in injury or death.
– Do not remove any small parts.
– Closely supervise children, pets or people with
physical/mental disabilities.
CAUTION!
Risk of Injury and Damage
Remaining burrs and missing end caps after
modifications on rods, such as shortened rod, can
lead to injury or damage.
– Deburr cut after cutting excessive length.
– Re-install end cap after deburring.
– Check end cap for tight fitting.
The swing-away mechanism can be used for different
options such as:
44
1528224-Y