4
Installing/Removing The Lid and Seat
1. Align the two (2) lid clamps of the commode lid with the back frame rail.
(Each clamp should sit inside the seat supports)
. Push down on lid
until it clamps firmly into place.
2. With the lid in the up position, place the seat on top of the commode
frame with the four (4) seat clamps aligned with the back frame. Push
down on the seat until it clamps firmly into place.
3. When removing the seat or lid, remove the seat first and then the lid. To
remove, grasp the back corner of the lid and/or seat and lift up firmly.
Installing/Removing The Lid Pad
1. With the lid in the upright position, slide the lid pad over the front edge of
the lid.
2. With the lid in the up position, grasp the sides of the lid pad and pull to
remove from the lid.
INSTALLING/REMOVING THE LID, SEAT AND LID
PAD (FIGURE 2)
NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in
the SAFETY SUMMARY of this instruction booklet.
WARNING
Commode seat MUST be DOWN before sitting on the commode.
CAUTION
BEFORE removing/installing seat and lid, allow seat/lid to reach
room temperature if exposed to cold. This will help prevent the
seat clamps from breaking when being removed/installed onto
commode back frame rail.
Содержание 6499BHD
Страница 26: ...26 NOTES...
Страница 27: ...27 NOTES...