© INUX3D 2022
V1.2
Place the right side of the Mini
Stand over the top of the ATEM
Mini and the 2 aluminium bars
Drop in two of the supplied
M5x25 mm bolts into the holes
to affix the right side of the Mini
Stand onto the aluminium bars
These only need to be lightly
tightened. You will damage the
plastic sides if you tighten with
force
Place your hand underneath
the entire assembly and
squeeze the Left and Right
sides together
Flip the entire Mini Stand over so
the left side is now on top
Drop in 2 more M5x25 mm
bolts into the holes and
lightly
tighten
Position the Mini Stand as
shown and note the 2x M4 slide
in nuts you dropped in earlier
We will be attaching the top
cold shoe mounts to these two
T-nuts
PK1 PRO STREAMER AM
Assembly Instructions Page 3 of 5
