© INUX3D 2022
V1.2
We will now flip the Mini Stand so the bottom is facing upwards and
the wire managers are pointing away from us
If you are attaching the OPTIONAL cheesebar
, you will
lightly attach
the cheesebar to the slide in T-nuts with 2 M5x8mm bolts. The
majority of the cheesebar will be toward the rear
Once both bolts are attached to the nuts, slide the cheesebar along
the aluminium bar so that it is centred along it’s length
You may now tighten the bolts
If you have attached the
OPTIONAL cheesebar
, you can
mount it onto a 1/4-20 or 3/8
tripod or similar mount
The last step is to add the rubber
feet in the event you wish to
move your stand from the tripod
to a desktop position
PK1 PRO STREAMER AM
Assembly Instructions Page 5 of 5
Congratulations on completing
the assembly of your PK1 Pro
STREAMER AM
