neoVI FIRE 2 User’s Guide
2
© 2016 Intrepid Control Systems, Inc.
Version 2.1 - October 10, 2016
Figure 1: neoVI FIRE 2 in its Protective Insert.
Lift up the plastic sheet, remove the FIRE 2, and then fold back the cardboard upon which it
rested. Underneath you will find the cables and other accessories listed above. Please remove,
unwrap and inspect all of the contents, an example of which is shown in Figure 2.
If anything is missing or damaged, please contact Intrepid for prompt assistance, using the
information in Chapter 8. Detailed instructions for attaching the cables to your hardware are
provided later in the document.
Note:
While the USB cable in the FIRE 2 package uses industry
standard connectors and pinouts, not all USB cables are the
same. To ensure reliable operation, please use the cable included
with the FIRE 2. If you need to replace the original, be sure not to
use one longer than 6’ (2 m) or you may experience problems with
your hardware. If necessary, contact Intrepid for a replacement.
