Intrade Line JS-981PQ, Оригинальное руководство пользователя

Страница: 5 / 22

original instructions
Page 5 of 22
power tool will do the job better and safer at the rate for which it was designed.
b) Do not(use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control;
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could result in a hazardous situation.
5) Service
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Additional safety instructions
•
NEVER SPRAY AT PERSONS - Never aim the nozzle at another person or animal. Never
allow the spray to come into direct contact with the skin.
•
FLASH POINT - This spray gun must not be used for spraying flammable paints and solvents
with a flash point of less than 32 °C
•
VENTILATION - Always make sure that there is adequate ventilation in the work area when
spraying.
•
BASKET NOZZLE -Always keep the spray basket nozzle in place during use.
•
CONSIDER WORK AREA ENVIRONMENT -Do not use spray guns where there is a risk of
fire or explosion.
•
BEWARE OF ANY HAZARD -Beware of any Hazard by the material being sprayed and
consult the markings on the container or the information supplied by the manufacturer.
•
DO NOT SPRAY - Do not spray any material where the hazard is not known.
•
USE EYE PROTECTION - Always use appropriate eye protection to keep hazardous vapors