INTORQ BFK455, Руководство по эксплуатации

Страница: 30 / 52

Mechanical installation 4
j
| BA 14.0196 | 05/2013
30
BFK455-006.iso/dms
Fig. 15 Assembly parts
5. Attach the clips (12.11) with the bore holes (Ø12 mm) to the tension rods (12.14) and
tighten them with the self-locking nuts (12.8), the blind holes (Ø17 mm) pointing in the
direction of the stator and the screw heads of the complete manual release levers
sinking into the clips (12.11).
6. Position the second complete stator (1A) in front of the complete stator (1). Insert the
pre-assembled tension rods (12.14) into the through holes (Ø12 mm) of the first
complete stator (1) in the process.

Stop!
Tension rods must not be bent!
BFK455-008.iso/dms
Fig. 16 Preassembly of the brake with manual release on the motor
7. Screw four self-locking nuts (12.8A) between the motor end shield and the complete
stator (Pos.1) onto the tension rods (12.14) up to the point where the back side of the
self-locking nut aligns with the top of the tension rod.
8. Evenly tighten the brake with the six cheese-head screws (10) included in the scope of
supply in several runs using a torque key, Fig. 17.
9. Establish electrical connection and energise brake,

35.