INTORQ BFK455, Руководство по эксплуатации

Страница: 26 / 52

Mechanical installation 4
j
| BA 14.0196 | 05/2013
26

Stop!
Only in the case of rotors with mounting paste on their gear teeth:
| Remove cover films from both front ends of the rotor.
| Protect friction surfaces against contact with mounting paste!
| After the mounting, excessive mounting paste must be removed properly!

Note!
If a manual release is to be installed, the required worksteps in chapter
4.5.2Step 2 must be carried out
now
!
Assembly of the second stator
BFK455-017.iso/dms BFK455-017a.iso/dms
Fig. 9 Assembly of the stator
1 Complete stator 6 Flange 15 End shield
3 Complete rotor 10 Fixing screws
13. Push the complete stator onto the shaft.
14. Align the through holes in the complete stator (1) to the threads of the fastening bore
holes in the first stator.
15. Evenly tighten the brake with the six cheese-head screws (10) included in the scope of
supply in several runs using a torque key.
16. Establish electrical connection and energise brake (

35).
17. Use a torque key to retighten the fixing screws (10) with the required tightening
torque,

16.
18. Switch off power.