94626 1 10/17
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
GB
10
2 Startup
2 .1 Area of application
CAUTION!
Damage to the cutting mechanism!
Only use the machine to shred approved
materials!
Shredding other types of material can result
in damage to the equipment (e.g. destruc-
tion of the cutting mechanism, etc.).
The
intimus FlashEx
data shredder is a machine to
shred flash memory devices such as USB sticks, mobile
phones, mini tablets, SSD cards, CDs and DVDs.
DANGER!
Risk of injury! Fire hazard! Damage to the
machine!
Shredding a mobile device with a battery
can generate a flash or an explosion .
)
Always remove batteries from battery-
powered devices before shredding!
2 .2 Installation
1 .
Unpack and install the device.
2 .
Insert the plastic bag into the catch basket (Fig. 5/2).
3 .
Connect the device to the power supply via the
power plug (for information on the fuses which the
power socket requires, see
„Technical Data“, p. 14
.
3 Operation
3 .1 Mains switch (Emergency-stop)
000176
Fig. 1 Mains switch (Emergency-stop)r
This switch turns the machine either on (position „1“)
or off (position „0“).
3 .2 Keybord operator unit
1
2 3
4 5
6
7
8 9
000175
1
„Cutting system forward“ pushbutton
2
„Cutting system reverse“ pushbutton
3
„Cutting system stop“ pushbutton
4
Vario-Speed Minus Key
5
Vario-Speed Plus Key
6
Vario-Speed Display
7
Pilot lamp "Ready" / „Motor protection“
8
Pilot lamp "Material jam"
9
Pilot lamp „Door open“/„Safety glass open“/„Catch basket full“
Fig. 2 Keyboard
1
= „Cutting system forward“ pushbutton
Pressing this button starts the cutting system. Ma-
terial can now be fed to the shredder.
2
= „Cutting system reverse“ pushbutton
Pressing and holding this button starts the cutting
system in reverse.
3
= „Cutting system stop“ pushbutton
Pressing this button switches the shredder off, the-
reby halting the cutting system.
4
= Vario-Speed Minus Key
The machine’s cutting speed can be reduced in an
infinitely adjustable fashion to allow for increased
cutting capacity by activating the minus key.
5
= Vario-Speed Plus Key
The machine’s cutting speed can be increased in
an infinitely adjustable fashion by activating the
plus key.
6
= Vario-Speed Display
Displays the manually selected, current speed
when the cutting system is running.
