Intimidator GC 1K, Руководство пользователя

Страница: 53 / 74

50
Fault Code Table
Code Diagnosis Content Fault Code Wave
21 Main torque sensor disconnection
22 Main torque sensor output error (voltage too
high or low)
23 Vice torque sensor disconnected
24 Vice torque sensor output error (voltage too
high or low)
25 Main and vice torque difference is too large
26 Main torque sensor inner fault
32 Motor disconnected
33 Current of ECU is over the limit
34 Once side of motor has no assistance
35 Current sensor zero offset is too large
36 Motor voltage abnormal
Sensor Problem Troubleshooting Chart
Code Diagnosis Content Suggestions Solutions
21 Main torque sensor
disconnection
1. Unplug and re-plug
all wires
2. Check voltage of
each wire by
multimeter
3. Test with new ECU
1. Ensure proper
wire connections
2. Replace ECU
3. Change motor
22 Main torque sensor output
error (voltage too high or
low)
23 Vice torque sensor
disconnected
24 Vice torque sensor output
error (voltage too high or
low)
25 Main and vice torque
difference is too large
ECU Problem Troubleshooting Chart
Code Diagnosis Content Suggestions Solutions
26 Main torque sensor
inner fault
Check motor, if motor is
good test with new ECU
Replace motor,
replace ECU
32 Motor disconnected Test with new ECU Replace ECU
34 Once side of motor
has no assistance
35 Current sensor zero
offset is too large