Intimidator GC 1K Скачать руководство пользователя

Страница: 40 / 74

Radiator and Cooling Fan

Always keep the radiator screen clean and free of mud and debris. Do not

obstruct or deflect air flow through the radiator by installing unauthorized

accessories in front of the radiator or behind the cooling fan. Interference with the

radiator air flow can lead to overheating and consequent engine damage. Do not

spray the radiator with a high-pressure hose, as it could damage the radiator fins

and impair their effectiveness.

The electric cooling fan is controlled by a temperature switch and will

automatically turn on when needed. Periodically check the fuse and fan to ensure

its proper operation.

Air Filter

Always change the air filter at intervals outlined in the periodic maintenance

chart. Service the air filter more frequently if the vehicle is operated in wet or

dusty conditions, or if the vehicle is operated at high throttle for extended periods.

The filter is located under the seat on the driver’s side.

Figure 24: Air Filter Box

To change the air filter:

1. Unhook the clamps and remove the cover.

2. Turn and pull the filter to remove it.

3. Press new filter onto the air filter mount.

4. Replace the cover and re-attach the four clamps.

Содержание GC 1K











































































Результаты поиска

Содержание GC 1K

Отзывы:

Похожие инструкции для GC 1K

Бренды по названию

Популярные бренды

Intimidator GC 1K, Руководство пользователя

Результаты поиска

Содержание GC 1K

Отзывы:

Похожие инструкции для GC 1K

Бренды по названию

Популярные бренды