7
4.2.3.
Using the battery
The Standby time and Talk time capacities specified by the phone
manufacturer are obtained under ideal operating environment. The actual
values will vary with the network conditions, operating environment and
operation method.
Please comply with the local regulations on battery disposal (such as
recycling). Do not dispose it as household waste.
4.2.4.
Battery level indicator
When the phone is on, the battery level indicator is located at the upper
right corner of the screen.
4.3.
Memory Card
To install the T-flash card, remove the back cover and battery from the
phone. Pull card deck and then put it up, then the T-Flash card can be
installed
Follow the same operations to uninstall the T-flash card.
Schematic diagram:
4.4.
Connecting to the Network
4.4.1.
SIM card
Please insert available Subscriber Identity Module (SIM) card into your
phone before using it. SIM card is supplied by your network provider.
All the information related to network connection is recorded on the SIM
card, so is the contact information such as names, phone numbers and
SMS’s that you set to store on the SIM. You can take out the SIM card from
the phone and insert it into another GSM phone to use it. Most new phones
will recognize the SIM card automatically.
Do not touch the golden contacts of the SIM card; place it away from
electricity and magnetism to avoid damage. You will not be able to use the
phone if the SIM card is damaged.
Note:
Before inserting and taking out the SIM card, always make sure that
the phone is switched off and disconnected from any external power
source; otherwise both the phone and the SIM card may be damaged.
4.4.2.
Installing and uninstalling the SIM card
The SIM card usually comes attached to a special card. The metal contacts
of SIM card can be easily damaged by scratching, so take it out carefully
before assembling it into the phone.
Switch off the phone; remove the back cover, battery and other external
power source. Fit the SIM card into the SIM card slot. Align the angled
corner of the SIM card with the slot. Slide in the SIM card, make sure it is in
place, install the battery, and restore the back cover.
Likewise, to remove the SIM card, switch off the phone, remove the battery
and then take out the SIM card.
Schematic diagram:
Содержание Avatar 3D 2.0
Страница 20: ...20...
