background image

General information

7

General information

Reading and storing the user manual

This user manual is part of the Steel Frame Pool (referred to below only as 

the “pool”). It contains important information about initial use and 

handling.
Before using the pool, read the user manual carefully. This applies in 

particular to the safety information. Failure to follow this user manual may result in 

severe injury or damage to the pool. 
The user manual is based on the standards and rules in force in the European Union. 

When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for future use. If you pass the pool on to third parties, please be 

absolutely sure to include this user manual.

Proper use

The pool is designed exclusively for swimming. The pool is suitable for outdoor use 

only. The pump and skimmer may be used only in conjunction with this pool and not 

with other swimming pools. The pool is intended exclusively for private domestic use 

and not for the commercial sector.
Use the pool only as described in this user manual. Any other use is deemed improper 

and may result in damage to property or even personal injury. The pool is not a toy.
The manufacturer and vendor cannot accept liability for damage caused by improper 

or incorrect use.

Explanation of symbols

The following symbols are used in this user manual, on the product or on the 

packaging.

Declaration of Conformity (see the section “Declaration of 

Conformity”):  

Products marked with this symbol meet all applicable 

Community regulations for the European Economic Area.

Protection class II: The transformer is double insulated.

Содержание 28214




































Отзывы: