SEPAMAT F_maual_Vers.2.8f
18
9 Maintenance
Every 3 months a visual and operations test must be completed.
If the mains water valve continuously drips, then this must be decalcified. Therefore, remove the entire
valve from the tank and place it in a decalcifying solution (citric acid) so that the inlet and outlet are fully
submerged. Move the floating arm several times so that the decalcifying solution penetrates the valve
diaphragm chamber as well (24 hours exposure time). If the dripping continues after maintenance, then
the valve must be replaced.
10 Spare parts
Description
Figure No.
(see section 4.1)
Bestellbezeichnung
Multistage centrifugal pump SEPAMAT F 20
[1]
RMF-P20
Multistage centrifugal pump SEPAMAT F 40
[1]
RMF-P40
Basic controller
[2]
RMF-BPL
Pump controller BRIO
[5]
RMF-PST BRIO
Separation chamber
[6]
RMF-B
Floating valve for separation chamber
[8]
RMF-NSP
Spare parts for pumps SEPAMAT F 20 / 40
see section 5.2
12 Warranty / Guarantee
INTEWA GmbH guarantees this unit for 24 months from the date of purchase. Kindly keep the sales receipt
as proof of purchase.
Within the guarantee period, INTEWA GmbH reserves the right to either repair or replace faulty parts at its
own discretion.
The warranty does not cover any damage due to improper use, wear and tear, or intervention by third
parties. The warranty does not cover any defects which may only minutely affect the value or usability of
the device.
