SEPAMAT F_maual_Vers.2.8f
13
The provided rubber clamping device is to be fit on the back
side of the unit in the lower corners.
The unevenness of the wall can be balanced by various
screwing depths.
6.2 Connection to the mains water line
The connection to the mains water supply is done with the provided flexible hose and stopcock.
Screw the gland screw into the container connection and
carefully tighten with a fixed wench.
Note:
The flexible hose must not be overtightened as this may
interfere with the internal float valve, on the opposite side
of the connection. All provided flexible hoses have gland
screws with flat washers. The rubber washers must be
present. Additional sealing material must not be used on
gland nuts!
Screw the gland screw on the other end of the flexible pipe
into the stopcock mounted on the mains water line.
