S-ESA FACE MASK And
brEAthing vAlvE
USER MANUAL
The Interspiro S-ESA Face mask has been tested in accordance with EN 136 class 3
and part of EN 137 tested breathing apparatus for types of use specified. EC type-
examination (Directive 89/686/EEC) by DEKRA EXAM GmbH, Dinnendahlstr. 9;
44809 Bochum, Germany.
1 SAFEtY nOtiCE
The product must only be used with an approved Interspiro breathing apparatus:
SpiroGuide/SpiroGuide II-, QS/QS II- or 90U system.
Only use breathing air according to EN 12021.
If the face mask and/or the self contained breathing apparatus is to be used in
conjunction with other personal protective equipment it is important to ensure that the
additional personal protective equipment is compatible with the face mask and does
not impair the full protection of the respiratory protective device.
Examples of dangers which may require the use of additional personal protective
equipment:
-Liquids, steam or gases which can damage the skin.
-Pollutants absorptive by skin
-Thermal radiation
-Mechanical effects
-Explosive environments
-Oxygen-enriched breathing air.
The product must only be used by personnel in good health and trained in the use of
respiratory protective equipment. Individuals with beards or large sideburns may not
obtain an adequate seal. The face mask must be maintained, serviced and tested as
described in this user manual, Interspiro service manuals and Interspiro test instructions.
intErSPirO iS nOt rESPOnSiblE FOr
COMBINATIONS OF PRODUCTS, UNLESS PUT TO MARKET BY INTERSPIRO
CHANGES OR ADAPTATIONS MADE TO THE PRODUCT BY A THIRD PARTY
