Intersil ZL2005P, Руководство пользователя

Страница: 19 / 22

ZL2005PEV4
ZL2005PEV4DSr1.0 19
Default Configuration Text
The following PMBus commands have been loaded and stored into the Default Store of the ZL2005P
device. Each PMBus can be accessed with the Zilker Labs Evaluation software. The # symbol is used for
a comment line.
# Configuration file for ZL2005PEV4, Rev 2
#syntax:
#PMBus Command <tab> Value
#Erase default and user store
RESTORE_FACTORY
STORE_DEFAULT_ALL
MFR_ID ZilkerLabs
MFR_MODEL ZL2005PEV4
MFR_REVISION Rev_1.4
MFR_LOCATION Austin_TX
VIN_OV_FAULT_LIMIT 13.5
VIN_OV_WARN_LIMIT 13.2
VIN_UV_FAULT_LIMIT 4.2
VIN_UV_WARN_LIMIT 4.5
VOUT_COMMAND 1.2 #V
FREQUENCY_SWITCH 600 #kHz
POWER_GOOD_DELAY 1
TON_DELAY 15
TON_RISE 5
TOFF_DELAY 15
TOFF_FALL 5
SEQUENCE 0x0000
#Use Rdson current sense method with internal temp sensor
MFR_CONFIG 0x7981
USER_CONFIG 0x0000
PID_TAPS A=4163.75, B=-7518.75, C=3513.44
IOUT_OC_FAULT_LIMIT 20.
IOUT_AVG_OC_FAULT_LIMIT 15.
IOUT_UC_FAULT_LIMIT -10.
IOUT_AVG_UC_FAULT_LIMIT -8.
#low FET not enabled for output OV, output OV and UV count to 2
OVUV_CONFIG 0x01