Intersil Corporation
1001 Murphy Ranch Rd
Milpitas, CA 95035
Tel: 408-432-8888
http://www.intersil.com
©2005, Intersil Corp.
Page 8/16
Ver. 1.1, 12/19/05
Hardware Setup
By default, the ISL98001 Evaluation board is configured for an input video resolution of
1280x1024@60Hz on the VGA1 connector. The quickest way to verify operation is this:
•
Connect a monitor with a DVI input to the DVI output connector
•
Connect a 1280x1024@60Hz RGB video source to VGA1
•
Connect the 5V power supply to the power connector
At this point, the evaluation board’s FPGA will format the data from the ISL98001 and generate SXGA
video timing on the DVI output connector. The incoming SXGA image should appear on the DVI
monitor.
Additional video modes and AFE configuration options are available using the ISL98001 evaluation
software through the USB interface.
