Interroll Diverter SH 1500
Initial startup and operation
44
Version 1.0 (06/2022) en
Translation of original operating instructions
Operation
Before every operation
start
4
Check the module for visible damage.
4
Ensure that all safety devices operate flawlessly.
4
Ensure that only authorized persons are in the operating area of the module.
4
Ensure that the module is running freely and that no parts are jammed.
4
Remove equipment or material that is not required from the operating area.
4
Specify and monitor correct placement of the conveying good.
During operation
WARNING
Danger from rotating parts
Crushing and serious injuries due to parts of the body and clothing being pulled into the
module!
4
Do not remove the protective covers.
4
Wear personal protective equipment.
4
Avoid jewelry and bracelets.
CAUTION
Danger from shearing between product and universal support of side guide
4
Do not reach in from the side.
4
Take additional protective measures.
4
If material is jammed between side guides, switch off the module and ensure that it cannot be
started accidentally, then remove the fault.
Procedure in case of
accident or fault
4
Press the Emergency Stop pushbutton, power it down and ensure that it cannot be switched
on accidentally.
4
In case of an accident: Provide first aid and make an emergency call, if necessary.
4
Inform qualified personnel.
4
Have the fault corrected by qualified personnel.
4
Restart the module only after this has been approved by qualified personnel.
