Interroll Diverter SH 1500
Installation
Version 1.0 (06/2022) en
Translation of original operating instructions
41
Roller curve - lateral
diverter
6
3
3
7
7
3
4
4
3
2
5
1
1
Diverter
5
Roller curve
2
Connecting plate 1
6
Connecting plate 2
3
Washer
7
Nut
4
Torx screw
4
Position the modules to be connected (1, 5) in such a way that the side profiles are aligned.
4
Align the top edges of the modules by using the height-adjustable feet of the supports.
4
Check horizontal alignment with a spirit level or rotation laser.
4
Secure the adjusted height.
4
Use the connecting plate 1 (2) to connect the two modules at the underside of the side profile
at the diverter (1) and at the outside radius of the roller curve (5) with screws (4), washers (3)
and nuts (7).
4
Use the connecting plate 2 (6) to connect the two modules at the underside of the side profile
at the diverter (1) and at the inside radius of the roller curve (5) with screws (4), washers (3)
and nuts (7).
4
Fasten the module torsion-free, e.g., by anchoring it to the floor or to adjacent components.
