manualshive.com logo in svg

Interphase ENTIA 5536 DM PRI, Руководство пользователя

Поделиться
Скачать
Interphase ENTIA 5536 DM PRI Скачать руководство пользователя страница 3

Copyright Notice

©

 2000, 2001, 2002 by Interphase Corporation. All rights reserved.

Printed in the United States of America, 2002.
This manual is licensed by Interphase to the user for internal use only and is protected by 
copyright. The user is authorized to download and print a copy of this manual if the user 
has purchased one or more of the Interphase products described herein. All copies of this 
manual shall include the copyright notice contained herein. No part of this manual, 
whether modified or not, may be incorporated into user’s documentation without prior 
written approval of 

Interphase Corporation

13800 Senlac

Dallas, Texas 75234

Phone: (214) 654-5000

Fax: (214) 654-5506

Disclaimer

Information in this manual supersedes any preliminary specifications, preliminary data 
sheets, and prior versions of this manual. While every effort has been made to ensure the 
accuracy of this manual, Interphase Corporation assumes no liability resulting from 
omissions, or from the use of information obtained from this manual. Interphase 
Corporation reserves the right to revise this manual without obligation to notify any 
person of such revision. Information available after the printing of this manual will be in 
one or more Read Me First documents. Each product shipment includes all current Read 
Me First documents. All current Read Me First documents are also available on our web 
site.
THIS MANUAL IS PROVIDED “AS IS.” INTERPHASE DISCLAIMS ALL 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR 
ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL INTERPHASE BE LIABLE FOR ANY INDIRECT, 
SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, 
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA 
ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Trademark Acknowledgments

Interphase® and the Interphase logo are registered trademarks, (

i

)chip™, SynWatch™, 

FibreView™, ENTIA™, PowerSAN™, SlotOptomizer™, 

i

WARE™,

 i

NAV™, and 

i

SPAN™ are trademarks of Interphase Corporation

.

All other trademarks are the property of their respective manufacturers

.

Содержание ENTIA 5536 DM PRI





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды