manualshive.com logo in svg

Interpack ETII+ LD, Руководство пользователя

Поделиться
Скачать
Interpack ETII+ LD Скачать руководство пользователя страница 7

 

 

UH178TW 

/ 

UH678TW   

              UDH178-01 

7 

 
 

S

AFETY 

I

SSUES

 

There is a safety label used on all Interpack Tape Heads.  This label is placed on the Tape 
Head knife guard to warn operators and service personnel of the sharp cutting edge of the 
blade.  Please read the label and the following safety precautions before using the Tape Head. 

 

Read this manual for other important safety operating and service information. 

 

Only trained personnel are to operate and service Tape Head. 

 

Wear safety glasses. 

 

Shut off power to machine before adjusting. 

 

Unplug electrical power before servicing. 

 

All covers and guards must be in place before operating. 

 

Stay clear of moving parts which can shear and cut. 

 

Never operate the Tape Heads with the Knife Guard removed. 

 

Turn electrical supply off before servicing the Tape Heads, including tape 
loading and threading. 

 

Note:  Should any of the safety labels placed on the Tape Head be 
 

damaged or destroyed, replacements are available. 

 

 

 

 

 

Содержание ETII+ LD










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды