Interpack ETII+ LD, Руководство пользователя

Страница: 23 / 73

UH178TW / UH678TW UDH178-01
23
T
ROUBLESHOOTING
C
ONTINUED
T
ROUBLE
P
OSSIBLE
C
AUSES
S
OLUTIONS
“Tape Tabbing ” or folding
on itself on the trailing tape
leg
Generally, too much tension
on the application of the tape.
Follow steps below
Applying urethane rollers,
delrin guide rollers, knurled
metal rollers should spin
freely. Check for any
adhesive migration or build
up
Too much mandrel tension
Mandrel does not spin freely
even after tension is reduced
Too much one way clutch
roller tension
Tape unwind is difficult
Cutter blade is dull
Remove any adhesive build up
with silicon spray. Disassembly
any non-free spinning rollers and
remove any adhesive build up on
shafts.
Re-set mandrel tension
Disassemble mandrel assembly
and check for any dust or
adhesive build up
Re-set clutch roller tension
Rethread tape through the clutch
roller assembly eliminating the
upper roller
Replace blade
Front tape leg too short Generally, too much tension
on the application of the tape
Tape threaded incorrectly
Tape leg length misadjusted Follow corrective action in “ Tape
Flagging” section above
Check for proper tape threading
against threading diagram on
side plate of tape head
Re-set front tape leg length