Interpack ETII+ LD, Руководство пользователя

Страница: 31 / 73

UH178TW / UH678TW UDH178-01
31
Knife Arm Spring Replacement
If the compression spring breaks, the sequence to
change it is as follows.
1. Remove the snap ring attached to the knife
arm assembly. (Wear safety glasses while
working with retaining rings).
Figure 10-9
2. Slide off the repulsive pivot assembly from
current position as shown in Figure 10-10.
Figure 10-10
3. Remove the spring barrel from over lapping
position as shown in Figure 10-11. Remove
any broken particle from the spring guide.
Install new compression spring into the
captive position.
Figure 10-11
Snap Ring