Interpack CE-12P, Руководство по эксплуатации и список запасных частей

Страница: 8 / 43

CE-12P Manual 8
USM8131
5.3 Button Functions
Below table 5.1 shows all the buttons and switch functionality of your CE-12P Case
Erector control panel (Figure 5.2).
Control Panel Button Functions
Power Lamp Indicator Machine is energized when lamp is on
Power On Button Reset machine to the state of operation
Single Cycle Button Cycles one Case when in Automatic mode
Emergency Stop
Button Immediate stop machine operation
Continuous Cycle
Button Continuously Run when in Automatic mode
Cycle Stop Button Stop machine on cycle and reset fault
Auto-Manual Switch Selector switch for operating modes
Manual Reset Button Reset machine position
Function On Button Turns ON each of the manual functions (Table
4.1)
Function Off Button Turns OFF each of the manual functions (Table
4.1)
Fault Message Display Display fault messages and manual functions
codes
Alarm Buzzer Audible alarm for fault conditions
Alarm Reset Resets fault and mute Alarm Buzzer
Table 5.1
Figure 5.2
Note: When the main power switch is turned ON the Power Lamp will indicate that the
machine is energized. By pressing the Power ON button the amber light will flash and the
fault message will display 00 if there is no fault conditions. Otherwise if there is a fault
condition alarm buzzer will sound and a fault code will display.