Internorm I-tec Shading, Руководство пользователя

Страница: 57 / 84

56 57
2. c) Program permanent heat protection mode
If this function is activated, the I-tec shading after a learning period (max.
36 hours) regulates itself automatically depending on sun radiation and
temperature.
If the temperature and light intensity increase at the I-tec shading, the blind
goes down and the slats are turned to maximum view (minimising of sun
radiation = minimising of heating up of the room).If the temperature rises further,
the blind will close completely (maximum heat protection through blind).
If the temperature and light intensity reduce again, the slats of the blind are
first turned to maximum view. If the temperature falls further, the blind goes up
automatically or to the last selected position.
1. select function selection menu
© © £ £
2. Press and hold = confirm selection
ª ª ª ª
3. select function selection menu
£ © © £
4. Press and hold = confirm selection
¢ ¢ ¢ ¢
5. Press briefly = selection of channel which should be
programmed by all shadings
¢ £ £ £
= Channel 1
£ £ ¢ £
= Channel 3
£ ¢ £ £
= Channel 2
£ £ £ ¢
= Channel 4
¢ ¢ ¢ ¢
= All channels
¢ £ £ £
6. Press and hold = function programmed
ª ª ª ª
7. Programming process completed
£ © © £
8.
Further options:
1) Press and hold = repeat process
2) Press briefly = to the next function selection menu
3) 2x press and hold or no operation for 25 sec. =
completion of installation mode
GB
14_107_BHB_West.indd 57 02.06.14 13:00