International Thermal Research CO105D, Руководство оператора

Страница: 13 / 55

•
EXHAUST MUFFLER – Constructed of stainless steel and packed with ceramic insulation. The
straight through design eliminates any backpressure and reduces
exhaust noise by up to 50% (part # 13008 - 1 ½”, 13009 - 2”). Also
available in cold rolled steel. (part # 13006).
•
EXHAUST PIPE – Flexible stainless steel exhaust pipe will allow you to connect the heater to the thru-
hull exhaust fitting. The hose is flexible and allows you to easily route the exhaust around corners or
other difficult situations. See page 3-2 for installation details. (part # 5134 - 2”
(52mm) o.d., 5133 - 1 ½” (38mm) o.d. Insulating heat sleeve is available to
prevent burns from contact
with the exposed hot exhaust pipe. (part # 5136 -
2”, 5135 - 1 ½”). Good quality T clamps should be used on all exhaust
connections
•
AIR INTAKE FLEXIBLE TUBING – Allows you to connect the heater to the thru-hull fitting
providing outside combustion air for a sealed combustion system. See page 3-3
for installation details. (part # 8019)
•
THRU-HULL EXHAUST /INTAKE FITTING – Consists of a 2”(52mm) or 1 ½”(38mm) exhaust
outlet and a 2” air inlet, providing a balanced system for the heater. Short and
long sizes available for various hull thicknesses.
•
THRU HULL PLUG - Stainless Steel to fit 1 1/2" and 2" Exhaust / Intake Thru Hulls ( page 6-1)