International Thermal Research CO105D, Руководство оператора

Страница: 9 / 55

2.2 OPTIONS AND ACCESSORIES
HURRICANE options and accessories are available from selected ITR Dealers and Service
Centres. Call ITR for an authorized dealer near you.
•
WATER PUMP - These pumps circulates water through the system. It must be sized to a flow rate and
head capacity. See circulating water pump, page 3-9.
•
EXPANSION TANK - This tank is required to fill the heating system and allow for expansion. An
automotive type overflow tank, part # 20021, should be connected to the filler neck of the tank for larger
system capacities. Part # 20002: vertical, 5”W X 5 ½”D X 13”H (12.7cm X 14cm X 33cm) Part #
20001: horizontal, 12”W X 4 ½”D X 7”H (30cm X 11.4cm X 17.8cm)
•
WATER TO WATER HEAT EXCHANGER – this device recycles waste heat from your engine and
transfers it to the HURRICANE heater. The heater can also be used to pre-heat your engine. A second
heat exchanger can be used to boost the temperature of your domestic hot water supply. (part # 5130). A
double wall unit is available for the heating of potable water.
•
MIXING VALVE - This valve is an anti-scald, proportional thermostatic water mixing/diverting valve
with temperature lock at any setting. Fittings are 1/2" NPT and the temperature rating of the valve is 90°
to 120°F.