Page 7
4. Use a 3/16” drill bit to drill 3 starter holes ½”
deep through the 3 holes in the cabinet and into
the window sill.
5. Attach cabinet to windowsill with 3 - #10 x ½”
pan-head Phillips screws.
6. Check that the air conditioner cabinet is tilted ½
bubble on carpenters level to the outside so that
water will run to the outside.
On some models
Select the position that will place the sill supports
near the outermost point on the sill. Place the short
side of the sill supports, on the case bottom, toward
the window. Attach the sill supports to the case track
hole in relation to the selected position using 2 type
B screws in each support.
CAUTION:
Do not install this air conditioner in
a window if the bolts do not contact the window sill.
Attach Side Curtains to Window Frame
1. Pull left-hand curtain out until it fits into window
channel. Use a 3/32” drill bit to drill a starter hole
through the hole in the curtain housing and into
the lower window sash.
Front View
Top View
2. Insert one of the #10 x ¾” round-head screws
through hole and into lower window sash. Insert
one of the #10 x ¾” round-head screws through
threaded hole in top of curtain and one in bottom
of curtain.
3. Repeat for right-hand curtain.
Complete Window Installation
1. Insert foam seal behind the top of the lower
window sash and against the glass of the upper
window.
2. Place window-lock bracket on top of lower
window and against upper window sash.
