Page 2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed here.
Tools Needed
Flat-blade and Phillips head screwdriver
Drill and 3/16” or smaller bit
Pencil
Ruler or tape measure
Level
Scissors or Utility knife
Parts Supplied
A. Foam window sash seal
B. Window lock brackets (2)
C. #10 x 1/4” pan-head Phillips screws (6)
D. #10 x 3/8” pan-head Phillips screws (3 or 7)
E. #10 x 3/4” round-head screws (6)
F.
#10 x 1/2” pan-head Phillips screws (3)
G. Top channel
H. Side curtains (2)
I.
Foam seal
J.
Sill support (2) Nut (2) Bolt (2)
K. Condensate Drain Cup (1)
NOTE:
Mounting Parts provided varies per unit of different capacity. Please check your accessories bag carefully
when you open the carton.
Installation parts are supplied for double-hung windows up to 39” wide.
