Page 5
INSTALLATION INSTRUCTIONS
Unpacking
Remove packaging materials.
•
Remove and dispose or recycle all packaging
materials.
•
Remove tape and glue residue from surfaces before
turning on the air conditioner. Rub a small amount of
liquid dish soap over the adhesive with your fingers.
Wipe with warm water and dry.
•
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your air conditioner.
•
Handle air conditioner gently.
1. Remove air conditioner from carton and place it on
cardboard.
2. Remove shipping screws from both sides of cabinet.
3. Remove front panel by removing 2 Phillips
screws on both sides.
4. Pull on handle to slide air conditioner out of
cabinet. Place air conditioner on cardboard.
5. Remove any packing foam from inside of unit.
NOTE: Do not lift, push, pull or remove any
expanded polystyrene (foam) from inside the air
conditioner. It is not packing material.
Window Installation
NOTES:
•
Handle air conditioner gently
•
Be sure your air conditioner cabinet does not fall
out of the opening during installation or removal.
•
The location where the power cord exits the air
conditioner should be no more than 4 ft (122cm)
from a grounded 3 prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of the air
conditioner.
Attach Top Channel
NOTE: Attach top channel and side curtains to air
conditioner cabinet before placing cabinet in window.
•
Locate supplied bag of screws.
•
Place top channel on top of air conditioner
cabinet, lining up the 3 holes in top channel with
3 holes on top of air conditioner cabinet.
•
Using 3 - #10 x 3/8” pan-head Phillips screws,
attach top channel to air conditioner cabinet.
