Page 6
Attach side curtains
1.
Locate provided bag of screws
2.
Insert top and then bottom of right-hand curtain
housing in top and bottom curtain guides on air
conditioner cabinet.
Back View
Bottom View
3.
Extend right-hand curtain outward so you may
insert the first screw through the middle hole of the
curtain. Using #10 x ¼” pan-head Phillips screw, screw
curtain to middle hole in air conditioner cabinet.
NOTE: This screw is required to correctly attach
curtain (top to bottom) to the air conditioner cabinet.
4.
While the right hand curtain is still extended,
insert #10 x ¼” pan-head Phillips screws into the top
and bottom slots of curtain. Screw Curtain to the top
and bottom holes in air conditioner cabinet.
NOTE: Some curtains may have 2 slots on each end.
You will be able to see a mounting hole through the
correct slot.
5.
Slide curtain housing into guides as far as it will
go.
6.
Repeat above steps for left-hand curtain.
Attach Foam Adhesive Seal
Attach foam adhesive seal along the bottom of the
curtain bottom channel.
Install Cabinet into Window
•
Handle air conditioner gently.
•
Be sure your air conditioner cabinet does not fall
out of the opening during installation or removal.
•
The location where the power cord exits the air
conditioner should be no more than 4 ft (122cm)
from a grounded 3 prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of the air
conditioner.
1. Center empty cabinet in window. Check that
lower rail of air conditioner cabinet is behind and
against back side of windowsill. Maintain a firm
hold on the air conditioner cabinet. Lower
window sash to hold cabinet in place. Top
channel must be on inside room of window sash.
2. Measure the distance between the right-hand
side of the cabinet and the inside of the window
channel
3. Repeat for left side. Adjust the cabinet until the
distance on each side is the same.
