Intermec SR61T, Руководство пользователя

Страница: 35 / 72

Chapter 3 — SR61T Interfaces
SR61T Tethered Scanner User’s Guide 23
4 Turn on your host device.
5 If necessary, use the configuration bar codes in the next section to
configure your SR61T for an International keyboard. The default
keyboard is North America.
Setting up the USB Interface
This section provides configuration bar codes for a basic USB
interface setup. All bar codes marked with (*) indicate the default
value. For more configuration options see
Chapter 4, "Configuring
the SR61T” on page 31 .
International Keyboard
By default the SR61T uses the keyboard HID USB cable mode. Use
these configuration bar codes to select the keyboard for your country.
For additional keyboards see EasySet.
North American Windows (*)
French Windows
French Canadian Windows 95/98
French Canadian Windows XP/2000
Note: If you are using a non-powered USB cable, you may get a
message that the host does not provide enough power. For
example when you connect the USB cable to a keyboard hub or
if there are other USB devices connected. In this case use a
different hub or disconnect other USB devices. Otherwise use a
powered USB cable.