Chapter 3 — SG20T Interfaces
SG20T Tethered Scanner User’s Guide
23
RS-232 Interface
The SG20T can be connected to a host using one of the RS-232 cables.
Power is provided by the external power supply connected to the RS-
232 cable. See the
“Required Accessories” on page 6
for a list of part
numbers for the different cables.
Connecting an RS-232 Cable
To connect with an RS-232 cable
1
Turn off your host device.
2
Connect the RS-232 cable to your SG20T and the host.
3
Connect the power supply to the cable and an AC power outlet.
4
Turn on the host device. The scanner beeps twice.
5
If necessary, use the configuration bar codes in the next section to
configure your SG20T serial parameters to match the PC.
RS-232 cable with power jack
Содержание SG20T1D
Страница 1: ...SG20T Tethered Scanner User s Guide...
Страница 4: ...iv SG20T Tethered Scanner User s Guide...
Страница 26: ...Chapter 2 Scanning with the SG20T 16 SG20T Tethered Scanner User s Guide...
Страница 61: ......