Intermec PW50, Руководство пользователя

Страница: 16 / 52

Chapter 1 — Using the PW50 Workboard Printer
6 PW50 Workboard Printer User Guide
Understanding the Printer Sounds
The PW50 plays sounds in response to several actions that you can
take with the printer. Use the following table to understand when the
sounds occur and what they mean.
Using the Batteries
The PW50 uses a rechargeable 2200 mAh lithium-ion battery (Model
AB13) for power. You must fully charge the battery before you can use
the PW50. When the printer is in Standby mode, a fully charged
battery can last up to one week without recharging.
Feed Press to advance receipt paper. The amount of media
that feeds depends on the type of media you are using.
Media advances by 5 mm (0.2 in) or feeds a configured
length of media based on your media and settings.
If the printer is printing, pressing this button pauses
printing. Press the button again to resume printing.
Press and hold the Feed button for 3 seconds to
perform a testfeed and register new media.
Understanding How to Use the PW50 Buttons (continued)
Button Name Functions
Understanding the Printer Sounds
Sound Occurs When:
Power
•
You insert a battery in the printer.
•
The PW50 starts charging the battery.
•
You plug in the AC adapter.
Hardware You open the media door, close the media door, or insert a cable.
Button You press one of the PW50 buttons.
Error
•
The printer cannot feed paper or print a job because of a
hardware issue such as the media door open, a paper jam, or
there is no media.
•
An error occurs such as a paper jam, a print error, or the
printer is out of range.