Intermec PW50, Руководство пользователя

Страница: 18 / 52

Chapter 1 — Using the PW50 Workboard Printer
8 PW50 Workboard Printer User Guide
3 Insert the edge of the battery under the lip of the PW50 and then
push down until you hear the battery latch click.
Charging the Batteries
There are two ways to charge the PW50 battery:
• Connect power to the printer while the battery is installed.
• Use the AC18 4-bay battery charger.
For information on charging your battery in the 4-bay battery
charger, see the
AC18 4-Bay Battery Charger Instructions
.
It takes approximately 6 hours to charge the battery while it is
installed in the PW50 printer. To charge the battery inside the PW50,
you need these items:
• Intermec 12 VDC power supply (Model AE19)
• AC power cord
To charge the battery inside the PW50
1 Install the battery in the PW50. For help, see the previous section,
“Installing the Battery.”
2 Connect the power supply to the power connector on the printer.
3 Connect one end of the power cord to the power supply, and then
plug the other end into an AC outlet.