Intermec PW50, Руководство пользователя

Страница: 19 / 52

Chapter 1 — Using the PW50 Workboard Printer
PW50 Workboard Printer User Guide 9
Extending Battery Life
Here are some tips for extending the overall life of your battery:
• Never expose the battery to direct sunlight or temperatures over
40 °C (104 °F).
•
Only charge the battery inside the PW50 using a power supply or
in the 4-bay battery charger (Model AC18).
Here are some tips for extending the life of your battery between
charges:
• Press the Standby button to put the printer in Standby mode.
• Remove the battery from the printer if you are not going to use it
for three or more days.
• Do not operate the PW50 in extremely cold temperatures. Using
the PW50 in temperatures below freezing reduces the overall
battery life.
Remember that any rechargeable battery loses its ability to maintain a
charge over time. You can only recharge it a finite number of times
before you must replace it.
Loading Media
You can use roll or fanfold receipt media with the PW50 printer. The
PW50 ships with a small amount of media loaded and a test page
printed to verify that the printer works. For information on media
specifications, see
“Specifications” on page 36 .
Note: The printer ships with an adhesive cover installed over the
fanfold media slot. If you are using fanfold media, remove the cover
before printing. To return to roll media printing, reinstall or replace
the Lexan Cover (P/N PW504-9-067-03).