TITLE
Model
DOCUMENT NO.
PAGE
PM43 Service Work Instructions
PM43,PM43C
SWIPM43x-000
Page
60 of 70
Intermec Proprietary Document
OPERATION:
Internal Rewinder Mechanism
The internal rewinder is a factory configurable option. Printers built without the internal rewinder option can be retrofitted to
include the internal rewinder by Intermec Service Depots or third party service depots that are authorized by Intermec.
Tools Required
Description
Part Number
Torx Driver
T10
Torx Driver
T20
Allen Driver, 1.5mm-2.0mm
Parts Required
Item Part Number
Description
Qty
1
710-090S-001
Internal Media Rewinder, Sub-Assy, Spare Kit, PM43 (include stepper motor,
rewinder assembly, belt, stepper rewinder PCBA)
1
2
715-616S-001
Label Taken Sensor (LTS), Spare Kit, PM43
1
3
710-168-001
Motor,Stepper Rewind PM43 (does not include mount plate as shown)
1
4
234-053S-0300
PCB Assy, Rewind Motor Driver
1
5
825-218-001
Belt,Rewinder PM43
1
6
710-089S-001
Media Rewinder, Sub-Assembly, PMB43
1
7
657-030-001
Shaft, Media Divert, Spare, PM43
1
8
653-679-001
Plate, Batch, PM43
1
9
1-994059-008
Screw, MRT 4x8 ZP, T20 (14 lbf.in/16 kgf.cm) – Mounting Torx screws
8
10
1-994058-004
Screw, MRT 3X4 ZP, T10 (5 lbf.in/6 kgf.cm) – Included with LTS spare kit
2
Label Taken Sensor (LTS) Replacement
1. Remove the media and electronic cover.
2. Remove the front panel. See page 11 on how to remove the front panel.
3. Disconnect sensor cable from P29 connector on the main logic board.
4. Remove Torx screwing the sensor mounting plate and remove the sensor assembly. See Figure 1.
5. Reverse the procedure to install replacement sensor assembly
Figure 1
Label Taken Sensor (LTS) Spare
2
6
10
6