TITLE
Model
DOCUMENT NO.
PAGE
PM43 Service Work Instructions
PM43,PM43C
SWIPM43x-000
Page
20 of 70
Intermec Proprietary Document
OPERATION:
Printhead Lift Sensor Assembly
Printhead lift sensor senses when the printhead lifted. This printhead lift sensor assembly is used on both PM43 and PM43c.
Tools Required
Description
Part Number
Torx Driver
T10
Torx Driver
T20
Parts Required
Item Part Number
Description
Qty
1
236-261S-130
ASSY, CABLE, HEADLIFT SENSOR, Spare, PM43 (include 1-994058-010)
1
2
1-994058-010
Screw MRT 3X10 FBZ (-5 lbf.in/6 kgf.cm)
2
Printhead Lift Sensor Assembly Replacement
1. Remove the 2 torx screws securing the headlift sensor assembly. See Figure 1.
2. Unplug the sensor cable assembly from the MLB and lift the headlift sensor away
3. Reverse the procedure to install replacement headlift sensor assembly
Figure 1
Headlift Sensor Assembly
2