manualshive.com logo in svg

Intermec MicroBar NX, Справочное руководство

Поделиться
Скачать
Intermec MicroBar NX Скачать руководство пользователя страница 180

Symbologies—Interleaved 2 of 5

170  

MB/NX/RM/00/E/970131

Barcode length

Barcode length (number of characters) for Interleaved 2 of 5 = [barcode data + check digit if
applicable]. The minimum length possible is 2 characters.

Interleaved 2 of 5 always encodes an even number of characters. To handle codes with an
odd number of characters, the MicroBar NX will accept a code with the last character
printed as 5 narrow bars. In this case, all useful characters are transmitted.

For maximum security, we strongly recommend that you define 1, 2 or 3 fixed lengths.

Any Length (*)

Define 1 Or 2 Or 3 Fixed Lengths—
Use Number Codes

Define 1 Or 2 Or 3 Fixed Lengths—
Use Actual Code Lengths

Defining 1 or 2 or 3 fixed lengths using the number codes

1.  Scan Define 1 Or 2 Or 3 Fixed Lengths—Use Number Codes.

2.  Use the number codes provided on the back cover of this Installation Guide to enter 1, 2
or 3 lengths and scan End Selection after each length.

If you only enter 1 or 2 fixed lengths, scan End Selection twice after the last length you
enter (after the first or second length as applicable).

Defining 1 or 2 or 3 fixed lengths using actual code lengths

1.  Scan Define 1 Or 2 Or 3 Fixed Lengths—Use Actual Code Lengths.

2.  Scan the number code—1 or 2 or 3—corresponding to the number of lengths you want
to define using the number codes provided on the back cover of this Installation Guide.

3.  Scan End Selection.

The first / second / third Interleaved 2 of 5 codes with different lengths that you read will fix
the accepted code lengths—the  MicroBar NX will then not accept codes with other lengths.

Содержание MicroBar NX











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды