Intermec Janus 2010, Руководство пользователя, Страница: 422 / 558

JANUS 2010 Hand-Held Computer User’s Manual
nugget
39
helconital
12-84
Scan Ahead
Purpose: Enables or disables scan ahead. If you enable this parameter, you can scan a
number of labels that are held in a stack until the reader can process the data. If
you disable this parameter, the reader processes each label you scan before you
can scan the next label.
Default: Disabled
Syntax: SDdata
Acceptable values for data are:
0 Disabled (scan one label at a time)
1 Enabled (scan many labels at a time)
Scan: One of these bar codes:
Disable Scan Ahead
*$+SD0*
*$+SD0*
Enable Scan Ahead
*$+SD1*
*$+SD1*
Scanner Devices
Purpose:
Identifies the type of scanner you have connected to the JANUS 2010 reader.
The reader can optimize the scanning performance by using the scanner you
define in this command.
Note: You only need to set the Scanner Devices command when you use the COM2
port as a scanner input port. When you select a specific scanner, other scanners may
not function properly.
Default: All compatible scanners (including wands)