manualshive.com logo in svg

Intermec Janus 2010, Руководство пользователя, Страница: 308 / 558

Поделиться
Скачать
Intermec Janus 2010 Скачать руководство пользователя страница 308

JANUS 2010 Hand-Held Computer User’s Manual

nugget

39 

helconital

10-26

Using MkImage and PutImage (continued)

Problem

Solution

Error, not enough
free conventional
memory to create
disk image

2010U.032

Free some conventional memory and then try to run MkImage again. For
help, see “Making More Memory Available on the Reader” in Chapter 3.

Error, not enough
free disk memory to
create output file

2010U.033

There is not enough memory on your disk to create the MkImage output
file. Remove one or more files and free some disk space.

Error, could not
open image file

2010U.034

Verify that the image file exists and you have the correct path and filename
in the PutImage command and then try again.

Error, image file
not found

2010U.035

Verify that the image file exists and you have the correct path and filename
in the PutImage command and then try again.

Error, invalid image
file, recreate using
the MkImage command.

2010U.036

The image was created by a method other than MkImage, or you entered
the wrong filename in the PutImage command. Create the image file with
MkImage, and then try running PutImage again.

Error, not enough
free conventional
memory to run this
program.

2010U.037

Free some conventional memory and try to run PutImage again. For help,
see “Making More Memory Available on the Reader” in Chapter 3.

Содержание Janus 2010















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов