manualshive.com logo in svg

Intermec Janus 2010, Руководство пользователя, Страница: 209 / 558

Поделиться
Скачать
Intermec Janus 2010 Скачать руководство пользователя страница 209

Networking the Reader

nugget

39 

helconital

6-27

6

To install Interlnk on the host computer from the reader’s drive D

1. Connect the reader to the host computer using a 7-wire, null-modem serial

cable and either the communications dock or optical link adapter.

2. Make sure that the MODE command is available on the host computer.

3. On the host computer, make sure that the current working directory is the

directory where you want to install the Interlnk files.

4. At the reader’s DOS prompt, type this command to copy the Interlnk files

from the reader’s drive D to the host computer:

intersvr /rcopy

Or scan this bar code:

*INTERSVR /ORCOPY*

*INTERSVR /RCOPY*

Follow any instructions displayed on the reader. If the host computer locks
up after you copy the files, reboot the host.

Making the Host Computer the Client

Follow these instructions to run Interlnk with the host computer as the client.
When the host computer is the client, you can access all the reader’s drives by
typing commands on the host computer’s keyboard.

Client

Server

2010U.101

Содержание Janus 2010















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов