Intermec EasyCoder PL-Series, Руководство программиста

Страница: 92 / 220

Chapter 8— Advanced Commands
74 EasyCoder PL-Series Printer Programmer’s Reference Manual
Example:
Input (SETSP.LBL):
! 0 200 200 210 1
T 4 0 0 10 Normal Spacing
SETSP 5
T 4 0 0 50 Spread Spacing
SETSP 0
T 4 0 0 90 Normal Spacing
FORM
PRINT
On-Out-Of-Paper Command
Purpose: You can issue this command to instruct the printer as to the course of
action to take when it encounters an error while printing the label (such as
running out of stock).
Format:
{ command } { action } { number of retries }
where:
{command}: ON-OUT-OF-PAPER
{action}: Choose one of the following:
PURGE: Discard the label if print error is
encountered after the specified number of
attempts.
WAIT: Do not discard the label if print error is
encountered. In this mode the printer
waits for the error to be corrected before
making the next print attempt.
{number of retries}: Specify how many times the printer should attempt to
print the label. Range is 1 to 16.
The default printer configuration is ON-OUT-OF-PAPER PURGE 2.
Example: This example instructs the printer to attempt to print the label twice.
Input (OOP.LBL):
! 0 200 200 150 1
ON-OUT-OF-PAPER WAIT 2
TEXT 5 0 0 20 MAKE TWO ATTEMPT
FORM
PRINT
On-Feed Command
Purpose: You can configure your printer to ignore, form feed, or reprint the last
label when you press the Feed button or when it receives a form-feed
character (0x0c).