Intermec EasyCoder PL-Series, Руководство программиста

Страница: 76 / 220

Chapter 7— Graphics
58 EasyCoder PL-Series Printer Programmer’s Reference Manual
Box Command
Purpose: You use the Box command to draw rectangular shapes of specified line
thickness.
Format:
{ command } { x0
} {
y0
} {
x1 } { y1 } { width }
where:
{command}: BOX
{x0 }: x-coordinate of the top left corner. For help, see “Label
Coordinate System” in Chapter 1.
{y0 }: y-coordinate of the top left corner. For help, see “Label
Coordinate System” in Chapter 1.
{x1}: x-coordinate of the bottom right corner. For help, see “Label
Coordinate System” in Chapter 1.
{y1}: y-coordinate of the bottom right corner. For help, see “Label
Coordinate System” in Chapter 1.
{width}: Unit-width (or thickness) of the lines forming the box. For
help, see “Units Commands” in Chapter 2.
Example Input:
Input (BOX.LBL):
! 0 200 200 210 1
BOX 0 0 200 200 1
FORM
PRINT
Example Output:
Note: Text coordinates (in output) are shown for illustration purposes
only.
200,200
0,0