Intermec EasyCoder PL-Series, Руководство программиста

Страница: 87 / 220

Chapter 8— Advanced Commands
EasyCoder PL-Series Printer Programmer’s Reference Manual 69
Justification Commands
Purpose: You can control alignment of fields by using the Justification commands.
By default, the printer left justifies all fields. A Justification command
remains in effect for all subsequent fields until you specify another
justification command.
Format:
{ command } [ end ]
where:
{command}: Choose from the following:
CENTER Center justifies all subsequent fields.
LEFT Left justifies all subsequent fields.
RIGHT Right justifies all subsequent fields.
[end]: End point of justification. If no parameter is entered,
justification commands use the print head’s width for
horizontal printing or zero (top of form) for vertical printing.
Example Input:
Input (JUSTIFY.LBL):
! 0 200 200 210 1
CENTER 383
TEXT 4 0 0 75 C
LEFT
TEXT 4 0 0 75 L
RIGHT 383
TEXT 4 0 0 75 R
FORM
PRINT
Example Output:
Page-Width Command
Purpose: The printer assumes that the page width is the full width of the printer.
The maximum height of a print session is determined by the page width
and the available print memory. If the page width is less than the full
width of the printer, you can increase the maximum page height by
specifying the page width.
Note: You should issue this command at the beginning of a print session.