Intermec CV61, Руководство пользователя

Страница: 52 / 120

Chapter 4 — Configure the Computer
40 CV61 Vehicle Mount Computer (Windows 7) User Guide
1
Make sure you have created a custom profile for your computer.
2 Tap Start > All Programs > Intermec > Profile Settings .
3 Select the profile you want to enable.
About Network Communications
You can easily add the computer to your wireless or wired data
collection network. You can connect your computer using:
• 802.11a/b/g/n radio communications.
• Bluetooth communications.
• USB and serial communications.
Configure 802.11a/b/g/n (Wi-Fi) Radio Communications
The computer contains an 802.11 radio to transfer data using wireless
communications and to support the TCP/IP network protocols. This
section of the manual assumes that your wireless network is set up,
including your access points.
By default, the 802.11 radio is enabled. If it is disabled, use the
following procedure to enable the Wi-Fi radio using Intermec Settings.
1
From the Intermec Settings main menu, tap Communications >
802.11 Radio > Radio Enabled .
Note: For more information on how to create your own custom
profiles, go to the Intermec Developer Center website at
www.intermec.com/developer/resources/CustomProfiles.aspx
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.