Interlogix ZEROWIRE ZW-6404, Руководство по установке

Страница: 90 / 109

90
7. Name the scene based on the result when the scene is run. For example, “Downstairs
Light On”.
8. Select Schedule “Always On”. To restrict the date and time when the key can be
pressed, select or create an alternate schedule.
9. Select the Activate Event Type as Key A, Key B, or Key C.
10. Select the device to control under Action Device. For ZeroWire Alarm System
functions, select the “Alarm System” (this can be renamed under Settings – System).
For Z-Wave functions, select the Z-Wave device directly in the drop down.
11. Select the function for the device to perform.
12. Repeat for Scene Action 2 to 16 if desired.
13. Click Save.
14. Press the Soft Key A, B, or C on the ZeroWire keypad to run the scene to confirm the
behaviour is as desired.
Send User PINs to Z-Wave Door Lock
ZeroWire can send user PIN codes to an existing Z-Wave Door Lock so the PIN codes on
the alarm system can also be used to operate the door lock.
This feature is available to User Types – Engineer, Master, and Custom users with Z-
Wave menu access.
Communication is one way from the ZeroWire to the lock, instructing the lock to add or
remove PIN codes. Each lock is individually controlled.
When “Send PIN(s) to Lock” is selected, ZeroWire queries the lock for the number of
standard users it supports. Some locks support up to 250 PINS, others are limited to 40.
Check your lock documentation.