Interlogix ZEROWIRE ZW-6404, Руководство по установке

Страница: 35 / 109

ZeroWire Installation Manual 35
In order to check the 3G radio signal strength:
1. Turn on WiFi Discovery Mode – this provides direct access to the ZeroWire from a
mobile device such as a smart phone, tablet, or laptop:
1.
Select main menu - Option 9, Advanced system
configuration.
2. Enter your Installer code.
3. Turn on WiFi Discovery Mode for 10 minutes.
4. Exits from Advanced system configuration menu.
2. Enable WiFi on your mobile device.
3. On your mobile device, browse for available WiFi networks and select the
‘ZeroWire_xxxx” network to connect to it. Only a single user can connect at any time
and there is no WiFi password. Once connected, the ZeroWire will be assigned a fixed
IP address of 192.168.1.3.
4. Open your web browser and enter http://192.168.1.3. The ZeroWire login screen
should appear.
5. Enter your username and password, by default this is “installer” and “9713”
6. Click Sign In, you should now see a screen similar to the one below:
Note: The set of accessible menus depends on the access rights of the user logged in the
system. The screen above shows default installer menus, but they can be different for a
Master User, standard user, and an installer with Master User rights. For more information,
see "Access rights and available menus" on page 37. The same applies to a connection
via the Ult app.
7. Click Settings.
8. Select Connection Status in the drop down menu.
MENU MENU
8
ENTER
YOUR 4 TO 8 DIGIT INSTALLER CODE
9 MENU