Chapter 2: Installation
TruVision PTZ 36X Camera User Manual
13
Functions supported by third party protocols
Table 4: Functions supported
Function Key
commands
Pelco
AD
422
VCL
Philips
Enter menus
Preset 95
Preset 94
(alternate Preset
77)
Wipe or Preset
77
Preset 77
Exit menus
Preset 95
Preset 95
Preset 97
Preset 77
Select/enter in
menus
Iris+ Iris+ Iris+ Iris+
Set auto pan limits Preset 92 and 93 Preset 62 and 63
Start auto pan
Preset 99
Preset 79
Preset 79
On – 2 - Enter
Play Cruise
1 Pattern
1
Preset 65
1 + Autopan
Preset 70 – 76 =
S Tours 1-7,
Preset 78 = S
Tours 8
Play Sequence
1 Preset 98
Preset 70
Preset 70
On – 8 - Enter
Turn 180 degrees
on pan
Preset 33
N/A
N/A
On – 1 - Enter
Show splash
screen
N/A
N/A
N/A
On – 997 - Enter
Setting the RS-485 communication
RS-485 is the interface that connects the dome camera to the control device.
Consequently the RS-485 setup of the dome camera and the control device
must be identical.
Locate the communication DIP switch block (see D, Figure 4 on page 10). See
Figure 5 for a depiction of the communication DIP switches of the dome camera.
The RS-485 default setting is half-duplex (see Figure 5). This setting should only
be changed by a qualified CCTV specialist. DIP switches SW3 and SW4 are
used for termination and Line Lock adjustment respectively. The SW5 DIP
switch is used to restore the dome camera to the factory default status.
Содержание TruVision PTZ 36X
